Teltonika RUTX10 High Performance Industrial Network Router with 802.11ac - White

Teltonika RUTX10 High Performance Industrial Network Router with 802.11ac - White

We created RUTX10 Enterprise module specially for small to mid-size office application. It comes with Dual Band WiFi 5 802.11ac, that is extremely important for high data transmission and lag-free browsing experience. RUTX10 has all the latest security features and ability to monitor and control your office data usage remotely.

Highly customizable RutOS is at the soul of RUTX10, but it’s actually synergy between hardware and software that makes this device perfect performer in enterprise solutions. Quad Core ARM Cortex A7 717 MHz CPU is more than enough for VPN functionality and if what we offer is not enough there is 256 MBytes Flash memory to install additional protocols.

Monitoring & Management

WEB UI: HTTP, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
FOTA: Firmware update from server, automatic notification.
SSH: SSH (v1, v2)
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems
MQTT: MQTT Broker, MQTT publisher
WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
JSON-RPC: Management API over HTTP/HTTPS
MODBUS: MODBUS TCP status/control
RMS: Teltonika Remote Management System (RMS)

USB

Data rate: USB 2.0
Applications: Samba share, custom scripts
External devices: Possibility to connect external HDD, flash drive, additional modem, printer
Storage formats: FAT, FAT32, NTFS

Ethernet

WAN    1x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN    3x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Wireless

Wireless mode    802.11ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
WiFi security    WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
ESSID    ESSID stealth mode
Wireless Hotspot    Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

Bluetooth

Bluetooth 4.0    Bluetooth low energy (LE) for short range communication

Network

Routing    Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
Network protocols    TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL)
VoIP passthrough support    H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring    Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall    Port forwards, traffic rules, custom rules
DHCP    Static and dynamic IP allocation, DHCP Relay, Relayd
QoS    Traffic priority queuing by source/destination (planned), service (planned), protocol or port (planned), WMM, 802.11e
DDNS    Supported >25 service providers, others can be configured manually
Network backup    VRRP, Wired and WiFi WAN options, each of which can be used as an automatic Failover
SSHFS (optional)    Possibility to mount remote file system via SSH protocol (not available in standard FW)

Security

Authetication    Pre-shared key, digital certificates, X.509 certificates
Firewall    Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention    DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN    Port based and tag based VLAN separation
WEB filter    Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access control    Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN    Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN Encryption    DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec    IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GRE    GRE tunnel
PPTP, L2TP    Client/Server instances can run simultaneously
Stunnel    Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN    Method of building scalable IPsec VPNs
SSTP    SSTP client instance support

Modbus

Modbus TCP slave    ID range 1-255
Modbus TCP master    Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit float (Big endian, Big endian with byte-swapped, Little endian, Little endian with byte-swapped)
MONITORING & MANAGEMENT
WEB UI    HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA    Firmware update from server, automatic notification
SSH    SSH (v1, v2)
TR-069    OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
SNMP    SNMP (v1, v2, v3), SNMP trap
MQTT    MQTT Broker, MQTT publisher
JSON-RPC (planned)    Management API over HTTP/HTTPS
RMS    Teltonika Remote Management System (RMS)

System Characteristics

CPU    Quad-core ARM Cortex A7, 717 MHz
RAM    256 MB, DDR3
FLASH memory    256 MB SPI Flash

Firmware/Configuration

WEB UI    Update FW from file, check FW on server, configuration profiles, configuration backup
FOTA    Update FW/configuration from server
RMS    Update FW/configuration for multiple devices at once
Keep settings    Update FW without losing current configuration

Firmware Customization

Operating system    RutOS (OpenWrt based Linux OS)
Supported languages    Busybox shell, Lua, C, C++
Development tools    SDK package with build environment provided
USB
Data rate    USB 2.0
Applications    Samba share, custom scripts (planned)
External devices    Possibility to connect external HDD, flash drive, additional modem, printer (planned)
Storage formats    FAT, FAT32, NTFS
INPUT/OUTPUT
Input    1x Digital Input
Output    1x Digital Output
Events    SMS, Email, RMS

Power

Connector    4 pin industrial DC power socket
Input voltage range    9 - 50 VDC, reverse polarity protection, voltage surge/transient protection
PoE (passive)    Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards
Power consumption    9 W Max

Physical Interface (Ports, Leds, Buttons)

Ethernet    4x RJ45 ports, 10/100/1000 Mbps
I/Os    1 Digital Input, 1 Digital Output on 4 pin power connector
Status LEDs    8x LAN status LEDs, 1x Power LED, 2.4G and 5G WiFi LEDs
Power    4 pin DC connector
Antennas    2x RP-SMA for WiFi, 1x RP-SMA for Bluetooth
USB    USB A port for external devices
Reset    Factory reset button

Physical Specifications

Casing material    Full aluminium housing
Dimensions    115 mm x 95 mm x 32 mm (H x W x D)
Weight    355 g
Mounting options    DIN rail (can be mounted on two sides), flat surface placement

Operating Environment

Operating temperature    -40 C to 75 C
Operating humidity    10 % to 90 % non-condensing
Ingress Protection Rating    IP30