eSTUFF Gearlab Elite Series PLA Filament for 3D Printers, 1.75mm, 1kg Roll - Black
eSTUFF Gearlab Elite Series PLA a fully biodegradable polymer with excellent properties that ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of 3D printers.
Major advantages of PLA is the very good layer cohesion, excellent surface quality and low processing shrinkage. It is particularly useful for 3D printers without a closed build chamber and produces consistent and reliable results.
The biodegradable properties means that PLA will slowly start to decompose when exposed to UV-radiation and moisture. If dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation can take up to 500-1,000 years.
RAL 9017
Environmentally friendly, bio-degradable polymer
Printing temperature: 185-215° C
Bed temperature: 0-45° C
Printing speed: 40-150 mm/s
Specifications
Brand compatibility: Universal
Diameter tolerance: 0,05 mm
Elongation at break: 4 %
Flexural modulus: 2150 MPa
Flexural strength: 63 MPa
Impact strength: 46,1 kJ/m²
Melting point (max): 180 °C
Non-toxic: Yes
Print speed: 150 mm/sek
Print temperature guideline: 210 °C
Printing colours: Black
Printing material: Polylactic acid (PLA)
RAL colour (number): 9017
Tensile strength: 1260 kPa