Reference: iMac27-Tejp
Brand: Apple
Adhesive Tape, Repair Kit for iMac 27 LCD-Screen, A1419, 2012-2017 Do you need to remove the screen on your iMac for a possible upgrade of the hard drive to an SSD or a proper cleaning of the cooling?When you are going to reassemble the screen, the best result is to use this set of self-adhesive tape with a perfect fit for your iMac.Do not forget to buy a...
Reference: iMac21-Tejp
Brand: Apple
Adhesive Tape, Repair Kit for iMac 21.5" LCD-Screen, A1418, 2012-2017 Do you need to remove the screen on your iMac for a possible upgrade of the hard drive to an SSD or a proper cleaning of the cooling?When you are going to reassemble the screen, the best result is to use this set of self-adhesive tape with a perfect fit for your iMac.Do not forget to...
Reference: ELLXB
Brand: Unbranded
Telecommunication Cable ELQXBE (EKKX) White, 4-Wire, 1x4x0.5mmProduct informationELQXBE (EKKX)100V. Halogen-free PE-insulated, HFFR-coated signal cable for telecommunications and digital telecommunications.Pair-twisted (1x4x0.5 is twisted to four-screw) and unshielded.Open, fixed installation indoors and in pipes. Can be ordered with RJ10, RJ11 or RJ45...
Reference: MD-3
Brand: Deltaco
Deltaco RJ45 Connector 20-Pieces for Network, Cat5e, UTP, UnshieldedYou will need to use a Crimp Tool for this connector.
Reference: A1418-TOOL
Brand: Unbranded
iMac Opening Tool, (Wheel/Roulette) A1418-A1419, 2012-2015Do you need to remove the screen on your iMac for a possible upgrade of the hard drive to an SSD or a proper cleaning of the cooling?Then this tool is perfect for this work, the tool is made of plastic with replaceable roller blades and does not damage or scratch the glass.Here you can see how to...
Reference: HP20P-BA-AD
Brand: Huawei
Huawei P20 Pro Adhesive Backside (CLT-L09C) - (CLT-L29C)
Reference: 81D650-801000
Brand: Asus
M2 Screw and Spacer for Installing M.2 Disks on Motherboard
Reference: DEL-109
Brand: Unbranded
Power Cable Grounded 3-Pin, 1,6 - 2m - BlackPower CEE 7/7, IEC 60320 C13, max 250V/10A
Reference: MB-SPEAKER
Brand: Unbranded
PC Computer Motherboard Internal BIOS Alarm Buzzer Speaker
Reference: 13020-01810500
Brand: Asus
M2 Screw and Spacer for Installing M.2 Disks on Motherboard, 2-Pieces
Reference: 776009
Brand: Maxell
Maxell Button Cell Battery, Lithium, 3V, CR2032, 1-PieceWidth: 2 cmDepth: 2 cmHeight: 0.3 cmCapacity: 220 mAhProduct type: BatteryTechnique: LithiumSupply voltage: 3VType: CR2032Weight: 3 g
Online Payment
Tempered Glass UV-Glue to Samsung Galaxy S10 Plus
Features:
1. 9H hardness and anti scratch(0.33mm)
2. Glass is whole transparent and no black border, will show HD display
3. Qleophobic coating will make it anti fingerprint and touch smoothly
4. As it is full glue screen protector , it will not have any touch issues
Tempered Glass UV-Glue to Samsung Galaxy S10 Plus
How to install the uv glass
Step1: Begin by cleaning your screen with wet and dry wips,then removing any dirt from your screen.
Step2: Remove the white cover of the tube,then use a knife or scissor cut a small hole.
Step3: Rotate the small cap of the tube clockwise and the liquid glue will come out automatically,
Make the liquid glue on the screen in a long line (It is recommended that the glue be poured completely. The glue that drops on the screen can't have air bubbles, if there is air bubble, use the needle to pierce the air bubbles).
Step4: Peel off the mask film from the screen protector.
Step5: Place the screen protector on your phone SLOWLY, the glue will spread evenly on the whole screen.
Never use fingers to press the middle of the screen after placing the screen protector.
Never lift the glass as it will be destroyed and will not be able to be used again.
Step6: Use the UV Light to dry the glue,we suggest one place per 1min (Light time: At least 3 minutes, divide the screen into three areas: top, middle and bottom. per partial light 1 minute to make sure the uv glue has dried) You can still adjust the placement of the glass before use the UV-lamp if it's not in best position, if there is glue spilling on the left or right sides,you can use dry paper to absorb the extra glue.
Step7: Clear the screen and turn off the UV-light for reuse.
Package included:
1×Transparent Tempered Screen Protector(Case Friendly)
1×Nano Liquid glue
1×Cleaning Kits
1×Small UV-Light
Reference: SAM-S10P-SMFC-S
Brand: Unbranded
Smart Mirror Flip Case Samsung Galaxy S10 Plus Silver Stylish and uniquely comprehensive mobile cover / case.- Off screen creates a mirror effect- Touch function!- See, for example, time or who is calling even when the case is closed- Perfect fit.
Reference: SAM-S10P-AHC-B
Brand: Unbranded
Samsung Galaxy S10 Plus Armor Heavy Duty Case Back Stand Cover - Black
Reference: SAM-S10P-TPU-S
Brand: Unbranded
Samsung Galaxy S10 Plus Carbon Fiber Look Soft TPU Back Cover - Silver
Reference: SAM-S10P-TPU-B
Brand: Unbranded
Samsung Galaxy S10 Plus Carbon Fiber Look Soft TPU Back Cover - Black
Reference: SAM-S10-UV-P
Brand: Unbranded
Tempered Glass UV-Glue to Samsung Galaxy S10 Features:1. 9H hardness and anti scratch(0.33mm)2. Glass is whole transparent and no black border, will show HD display3. Qleophobic coating will make it anti fingerprint and touch smoothly4. As it is full glue screen protector , it will not have any touch issues
Reference: SAM-S10E-UV-P
Brand: Unbranded
Tempered Glass UV-Glue to Samsung Galaxy S10E Features:1. 9H hardness and anti scratch(0.33mm)2. Glass is whole transparent and no black border, will show HD display3. Qleophobic coating will make it anti fingerprint and touch smoothly4. As it is full glue screen protector , it will not have any touch issues
Tempered Glass UV-Glue to Samsung Galaxy S10 Plus
Features:
1. 9H hardness and anti scratch(0.33mm)
2. Glass is whole transparent and no black border, will show HD display
3. Qleophobic coating will make it anti fingerprint and touch smoothly
4. As it is full glue screen protector , it will not have any touch issues
