DeLOCK M.2 B+M Male to 4xSATA 7-pin Converter, Marvell Chipset, RAID0/1/10/JBOD, NCQ, PCI-e 2.0, Bootabar
With this converter from DeLOCK, you get four SATA ports from an M.2 connection on your motherboard. When all four SATA ports are used, you have the option to run connected hard drives in RAID mode.
Specification
1 x 59 pin M.2 B+M male
4 x SATA 6 Gb/s 7 pin
Chipset: Marvell
Interface: PCIe 2.0
Form factor: M.2 3042
Compatible with M.2 connections that have M or B+M socket based on PCIe
Support for: Raid 0, 1, 10, JBOD, HyperDuo Virtual Disk (Safe/Capacity)
Native Command Queuing (NCQ) Support
Boat
Package contents: converter, Driver CD and manual
Dimensions (WxDxH): 42x30x13mm
Connections: 1 x M.2 Card
Number of channels: 4
Width: 3 cm
Data transfer speed: 600 MBps
Depth: 4.2 cm
Features: HyperDuo Virtual Disk
Supported devices: Hard disk, disk array (RAID), semiconductor device
Packaging type: Retail
Interface: 4 x SATA 6Gb/s - SATA
Interface: SATA 6Gb/s
Height: 1.3 cm
Operating system required: Microsoft Windows 7 / 8.1 / 10 (32/64 bits), Linux Kernel 4.4
RAID level: RAID 0, RAID 1, RAID 10, JBOD
Device type: Control board (RAID) - internal
Host bus: M.2 Card