Reference: iMac27-Tejp
Brand: Apple
Adhesive Tape, Repair Kit for iMac 27 LCD-Screen, A1419, 2012-2017 Do you need to remove the screen on your iMac for a possible upgrade of the hard drive to an SSD or a proper cleaning of the cooling?When you are going to reassemble the screen, the best result is to use this set of self-adhesive tape with a perfect fit for your iMac.Do not forget to buy a...
Reference: iMac21-Tejp
Brand: Apple
Adhesive Tape, Repair Kit for iMac 21.5" LCD-Screen, A1418, 2012-2017 Do you need to remove the screen on your iMac for a possible upgrade of the hard drive to an SSD or a proper cleaning of the cooling?When you are going to reassemble the screen, the best result is to use this set of self-adhesive tape with a perfect fit for your iMac.Do not forget to...
Reference: ELLXB
Brand: Unbranded
Telecommunication Cable ELQXBE (EKKX) White, 4-Wire, 1x4x0.5mmProduct informationELQXBE (EKKX)100V. Halogen-free PE-insulated, HFFR-coated signal cable for telecommunications and digital telecommunications.Pair-twisted (1x4x0.5 is twisted to four-screw) and unshielded.Open, fixed installation indoors and in pipes. Can be ordered with RJ10, RJ11 or RJ45...
Reference: MD-3
Brand: Deltaco
Deltaco RJ45 Connector 20-Pieces for Network, Cat5e, UTP, UnshieldedYou will need to use a Crimp Tool for this connector.
Reference: HP20P-BA-AD
Brand: Huawei
Huawei P20 Pro Adhesive Backside (CLT-L09C) - (CLT-L29C)
Reference: A1418-TOOL
Brand: Unbranded
iMac Opening Tool, (Wheel/Roulette) A1418-A1419, 2012-2015Do you need to remove the screen on your iMac for a possible upgrade of the hard drive to an SSD or a proper cleaning of the cooling?Then this tool is perfect for this work, the tool is made of plastic with replaceable roller blades and does not damage or scratch the glass.Here you can see how to...
Reference: DEL-109
Brand: Unbranded
Power Cable Grounded 3-Pin, 1,6 - 2m - BlackPower CEE 7/7, IEC 60320 C13, max 250V/10A
Reference: 81D650-801000
Brand: Asus
M2 Screw and Spacer for Installing M.2 Disks on Motherboard
Reference: MB-SPEAKER
Brand: Unbranded
PC Computer Motherboard Internal BIOS Alarm Buzzer Speaker
Reference: ASU650SS-240GT-R
Brand: Adata
ADATA Ultimate SU650 2.5" SSD, 240GB, 3D NAND Flash, 520MB/s Read Speed, 450MB/s Write SpeedADATA's Ultimate SU650 SSD implements 3D NAND Flash and a high-speed controller to offer a fast and stable SSD. It delivers much better and more reliable read/write speeds than the 2D NAND SSD.Up to 520MB/s sequential read speedUp to 450MB/s sequential write...
Reference: 13020-01810500
Brand: Asus
M2 Screw and Spacer for Installing M.2 Disks on Motherboard, 2-Pieces
Online Payment
Official Raspberry Pi 3 Model B Case White / Red
From Raspberry Pi the official Raspberry Pi 3 case designed to enclose and protect your Raspberry Pi 3 Model B development board. This Raspberry Pi 3 case is both stylish and lightweight and made from high quality moulded plastic. The RPi case has a modular construction consisting of 5 pieces which easily snap together without the need for any tooling or screws. The modular design of this Pi 3 Model B case means allow the sides and top to be removed allowing quick access to internal GPIO connections and interfaces
This Official Raspberry Pi case is designed for the Raspberry Pi 3 Model B, but it will also protect your Raspberry Pi B+ or Raspberry Pi 2 if you can accept blocking the LED light pipes.
Official Raspberry Pi 3 Model B Case White / Red
From Raspberry Pi the official Raspberry Pi 3 case designed to enclose and protect your Raspberry Pi 3 Model B development board. This Raspberry Pi 3 case is both stylish and lightweight and made from high quality moulded plastic. The RPi case has a modular construction consisting of 5 pieces which easily snap together without the need for any tooling or screws. The modular design of this Pi 3 Model B case means allow the sides and top to be removed allowing quick access to internal GPIO connections and interfaces
This Official Raspberry Pi case is designed for the Raspberry Pi 3 Model B, but it will also protect your Raspberry Pi B+ or Raspberry Pi 2 if you can accept blocking the LED light pipes.
Reference: ASM-1900138-21
Brand: OKdo
Raspberry Pi Okdo Raspberry Pi Cabinet Pi 4 Model B, ABS, Slide - BlackOriginal chassis to protect your Raspberry Pi 4 Model B in high-quality two-piece ABS construction. There are holes on the underside for eg wall mounting or desk. The chassis is delivered with rubber feet so that it is stable where you choose to place it.Made of ABS plasticCutouts for...
Reference: 18215
Brand: DeLock
DeLOCK - 18215 Mounting Kit for Raspberry Pi with Screws, Nuts and SpacersMounting kit from DeLOCK that allows you to connect other cards on the single-card computer Raspberry Pi or stack several Raspberry Pi on top of each other.4xM2.5 Distances 30mm in length4xM2.5 4mm Screws4xNuts
Reference: 18214
Brand: DeLock
DeLOCK - 18214 Mounting Kit for Raspberry Pi with Screws, Nuts and SpacersMounting kit from DeLOCK that allows you to connect other cards on the single-card computer Raspberry Pi or stack several Raspberry Pi on top of each other.4xM2.5 Distances 10mm in length4xM2.5 4mm Screws4xNuts
Reference: RB-2NOCAM
Brand: Raspberry Pi
Raspberry Pi Camera Module V2 Video Module, 1080p, 8 MP, Sony IMX219PQ CMOS, 15-pin Flat CableThe module uses Sony's IMX219PQ CMOS sensor which offers good video and image quality. The module also offers features such as noise reduction and controls over features such as exposure, white balance and luminance to give you the tools needed to take good...
Reference: ASM-1900133-11_Bulk
Brand: Raspberry Pi
OKdo Raspberry Pi 4 Model B 3-piece Standbox, White (bulk)OKdo Standard White Case is specially designed for the Raspberry Pi 4 Model B. It is a 3-part robust clear ABS plastic chassis that provides protection while providing access to all its ports.Dimensions (WxDxH): 62.2x93.7x31.5 mmWidth: 9.37 cmDesigned for: Raspberry Pi 4 Model B, 4 Model B Starter...
Reference: T7715DV
Brand: Raspberry Pi
OKdo AC Adapter for Raspberry Pi 4 Model B, USB-C, 3A, BlackAn OKdo high quality and reliable AC adapter that converts the AC power of the mains to the 5.1V 3A DC that the Raspberry Pi 4 needs. The AC adapter comes with four interchangeable plugs for different regions.1.5m cable length5.1V / 3A 15.3W USB-C AC adapterDesigned for Raspberry Pi 4 Model...
Official Raspberry Pi 3 Model B Case White / Red
From Raspberry Pi the official Raspberry Pi 3 case designed to enclose and protect your Raspberry Pi 3 Model B development board. This Raspberry Pi 3 case is both stylish and lightweight and made from high quality moulded plastic. The RPi case has a modular construction consisting of 5 pieces which easily snap together without the need for any tooling or screws. The modular design of this Pi 3 Model B case means allow the sides and top to be removed allowing quick access to internal GPIO connections and interfaces
This Official Raspberry Pi case is designed for the Raspberry Pi 3 Model B, but it will also protect your Raspberry Pi B+ or Raspberry Pi 2 if you can accept blocking the LED light pipes.
